Firmware for a Seeed XIAO ESP32-S3 + Seeed XIAO WM6108 (HaLow) node that acts as a mesh-connected access point for the OpenMANET project: phones/tablets/ATAK devices associate to the XIAO's local 2.4GHz Wi-Fi AP.
Wi-Fi HaLow (802.11ah) on Raspberry Pi: ALFA AHPI7292S (Newracom NRC7292) and Morse Micro MM8108 - setup, monitor mode, and the vendor gaps you have to work around
Arduino hardware driver for the Heltec HT-HC01 Wi-Fi HaLow (802.11ah) module, based on the Morse Micro MM6108
MM8108 802.11ah wifi usb dongle. Kicad design with CPWG
USB-C (USB 2.0) to M.2 Key-E carrier for the Gateworks GW16170 Wi-Fi HaLow card. KiCad 10, generated from Python, Rev A sent to JLCPCB.
Official website for the BLESS Project (REXUS/BEXUS Cycle 17). Characterizing Wi-Fi HaLow (802.11ah) performance in stratospheric environments. Built with React and TypeScript.
Web Serial configurator for LilyGo T-Halow (Taixin TX-AH) Wi-Fi HaLow radios. No install, no drivers — just Chrome.
A trail camera for sites with no cell service. Photos reach the cabin over a long-range Wi-Fi HaLow mesh, no tower and no subscription.
To associate your repository with the wifi-halow topic, visit your repo's landing page and select "manage topics."