An undergraduate DEVSIM teaching project for MICS3090, covering 1D p+-on-n silicon solar-cell simulation, visualization, experimental-data processing, and parameter calibration.
COMSOL Multiphysics simulations of planar MOSFET, 3D FinFET, and Gate-All-Around FET (GAAFET) with carrier concentration and electrical characteristic analysis.
自研 1D 漂移-扩散–泊松求解器 + Si p-n 结全套验证（解析不变量 L1 / 网格二阶收敛 L2 / 对照 NIST Sesame 2.0 L3），numpy+scipy，一条命令复现 · A from-scratch 1-D drift-diffusion PN junction solver, verified against closed-form theory and NIST Sesame 2.0
Local workbench for thin-film process recipes, 3D device geometry and silicon equilibrium, with a Quantum ESPRESSO workspace.
TCAD-based NMOS, PMOS, and CMOS inverter device characterization and simulation analysis.
Open-source multi-physics simulator for post-silicon and 3D-stacked transistors: 2D materials, CFET/GAA/M3D, thermal and yield. Never reports a number a solver didn't produce.
Lightweight, modular TCAD core for GaN RF HEMTs: plugin-based architecture, self-consistent Schrodinger-Poisson and drift-diffusion solvers, 426 tests.
Simulação de processos e dispositivos semicondutores: SUPREM-III (1-D), SUPREM-IV.GS (2-D) e MINIMOS 6.1 sob uma interface só. PySide6, Linux e Windows.
250 nm MOSFET process design and device simulation in Silvaco TCAD.
CCD-in-CMOS TDI pixel — end-to-end Sentaurus TCAD device simulation (real process flow, full-well capacity, QE, three-phase clock wells). Portfolio project.
Run and test embedded Linux applications on your host as if GPIO, SPI, I2C, UART, QSPI, and Ethernet devices were physically connected.
Open 1-D drift-diffusion solver for perovskite solar cells: band-gap-coupled photoinduced halide segregation, J-V, hysteresis and impedance. Pure NumPy/SciPy.
A physics-aware Bayesian optimization engine that drives any TCAD simulator to automatically optimize semiconductor devices.
Physics-first 0D/1D materials simulator, validation-first: pn-diode drift-diffusion, PEMFC/SOFC fuel cells and electrochemistry, each pinned to a source-cited reproduction test. Ships an MCP server exposing 9 guarded tools so AI agents can drive it. DEVSIM cross-check optional.
Device recovery experiments: durable worker ownership, real process crashes, external fault injection, and reproducible concurrency measurements.
Virtual CPE lab for TR-369/USP development and testing with a real OB-USP-AGENT, simulated TR-181 hardware, MQTT, fault injection, and a browser-based device UI.
To associate your repository with the device-simulation topic, visit your repo's landing page and select "manage topics."