Driver for TI's ADS1x15: 12 and 16 bit Differential or Single-Ended ADC with PGA and Comparator
-
Updated
Feb 10, 2021 - C++
Driver for TI's ADS1x15: 12 and 16 bit Differential or Single-Ended ADC with PGA and Comparator
A Linux library for the ADS1x15 Analog-to-Digital Converter
Library Driver for Analog to digital converters (ADC) ADS1015 and ADS1115 modules. RPI PICO RP2040 SDK C++
A Zend Extension for php to grant access to an existing i2c bus on a linux device (Raspberry Pi and for example the ADS1x15)
Led music visualizer experiment
Turn a dial and run commands
12-bit ADC ADS101x (ADS1013, ADS1014 and ADS1015) driver for ESP-IDF and STM32CubeIDE
ESPHome library for APA PHX board and any analog pH/ORP modules equiped with ADS1015. It is buld on my arduino library with all the benefits, like two-point calibration, ritch error detection and stable readings, etc. All the pool monitoring and maintenance controled from the HA.
Amos Arcade Joystick input driver for Raspberry-Pi
Automated greenhouse management on a Raspberry Pi — sensor monitoring, watering and climate control with Python, PHP and SQLite.
Arduino library for pH and ORP/Redox measurements with non-blocking operation, two-point calibration, and error detection. Features configurable sampling, rolling averages, and range validation (pH 0-14, ORP 0-1000mV). Compatible with any pH/ORP analog circuits using ADS1015. No external dependencies besides Wire.h.
Non-blocking ADS1015 + PCF8574AT sensing library for APA pool automation — pressure, AC current (RMS + power), solar irradiance, AUX voltage, tank-empty sensors, status LEDs and severity-matched alert buzzer patterns. Pure Wire.h, no external dependencies. AVR / ESP32 / STM32.
Automate APA pool systems using ADS1015 analog sensors and PCF8574AT I/O modules with this C++ library for AVR, ESP, and STM32 platforms.
Easy ADS1115 / ADS1015 16-bit ADC library: volts on 4 inputs, differential reads, automatic range, voltage dividers. No dependencies.
To associate your repository with the ads1015 topic, visit your repo's landing page and select "manage topics."