Skip to content

[BUG] Boost actions missing on Home Assistant 2026.11 #235

Open

Description

@nsleigh

What happened?

After upgrading to Home Assistant 2026.11.0, the hive.boost_heating_on, hive.boost_heating_off and hive.boost_hot_water actions no longer exist. Scripts and automations that call them fail, and Spook raises "unknown action" repairs for them. Only the services that the component registers itself (in async_setup_entry) are still listed under the hive domain.

Expected: the three boost actions are still available, as they were on 2026.10.

Cause: HA 2026.11 moved these services out of the core climate / water_heater platforms into homeassistant/components/hive/services.py. Core now registers them from its own async_setup (core 2026.11.0). This component replaces the hive domain and re-exports core's platforms, so core's async_setup never runs and the services are never registered. The current dev branch / 2026.11.1B1 has no async_setup either, so it's affected too.

Fix proposed in #234.

Steps to reproduce

  1. Run Home Assistant 2026.11.0 with this component installed.
  2. Developer Tools > Actions: search for hive.boost_heating_on. It isn't listed.
  3. Run a script that calls hive.boost_heating_on: it fails with an unknown action error.

Hive custom component version

2026.8.0 (also affects dev / 2026.11.1B1, by code inspection)

Home Assistant version

2026.11.0

How did you install the component?

Manually

Which Hive devices are affected?

Heating / thermostat, Hot water, Radiator valves (TRVs)

Debug logs

No errors are logged; the services are just not registered.
Spook repair: script_unknown_service_references -- `hive.boost_heating_on` (script.boost_heating)
Spook repair: script_unknown_service_references -- `hive.boost_heating_off` (script.boost_stop)

Anything else?

Worked on 2026.10.x. Applying #234 locally on HA 2026.11.0 brings back all three actions.

Checks

  • I've removed personal information (email, tokens, device IDs) from the logs above.

Activity

  1. HarryFlatter commented on Nov 4, 2026

    @HarryFlatter

    Hi, as I understand it you have posted a fix for the missing services caused by the latest HA core update.
    In advance of this becoming a new version, are there any particular source files that I could manually update to get theses services registered again?

    Many thanks

  2. nsleigh commented on Nov 5, 2026

    @nsleigh
    Author

    2. Hi, as I understand it you have posted a fix for the missing services caused by the latest HA core update.
    In advance of this becoming a new version, are there any particular source files that I could manually update to get theses services registered again?
    Many thanks

    The changes are here https://github.com/Pyhass/Hive-Custom-Component/pull/234/changes - be careful though and make sure you backup and ensure this patch matches the file you have.

  3. andyrozman commented on Nov 6, 2026

    @andyrozman

    Encountered the same problem, had to downgrade my HA... (not only because of this, although heating is one of my most used parts). They said that this release was one of biggest so far... I had at least 3 integrations not working...

  4. nsleigh commented on Nov 6, 2026

    @nsleigh
    Author

    Encountered the same problem, had to downgrade my HA... (not only because of this, although heating is one of my most used parts). They said that this release was one of biggest so far... I had at least 3 integrations not working...

    I had 5 integrations fail after the update, fortunately I was able to fix them using Claude AI locally. Most have now been fixed by the owners.

  5. iendicott commented on Nov 7, 2026

    @iendicott

    Encountered the same problem, had to downgrade my HA... (not only because of this, although heating is one of my most used parts). They said that this release was one of biggest so far... I had at least 3 integrations not working...

    I had 5 integrations fail after the update, fortunately I was able to fix them using Claude AI locally. Most have now been fixed by the owners.

    Thanks for the tip.

    For anyone wanting to give this a try, this is what I used as a prompt in Claude (free version)

    Based on this https://github.com/Pyhass/Hive-Custom-Component/pull/234/changes, can you tell me what is required to update this
    I then pasted a copy of my __init__.p into the prompt can you also display copy of the file so I can paste it into the existing file.

    This will give you an output that you can replace your copy with. For safety I took a backup of the existing file first. Once this is complete you will need to restart Home Assistant, and in my case I had to restart Node-Red.

  6. KJonline commented on Nov 8, 2026

    @KJonline
    Contributor

    @nsleigh i have merged your PR and released version 2026.11.0 to HACs

    Thanks for your contribution

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment

Metadata

Metadata

Assignees

No one assigned

    Labels

    No labels
    No labels

    Type

    No type

    Projects

    No projects

      Milestone

      No milestone

      Relationships

      None yet

      Development

      No branches or pull requests

      Issue actions