Issues

• Unclear question/answer for "Why isn't adaptive meshing on" in FAQ

  OpenCentauri/cosmos#392 · Filter by author csstup opened on Oct 9, 2026
  3

• CC1 + CANVAS: underextrusion with default extruder run_current 0.7 A, fixed by 0.8 A (stock value)

  OpenCentauri/cosmos#387 · Filter by author iDomi94 opened on Oct 7, 2026

• Extruder error when try to load filament or extrude, machine shutdown

  OpenCentauri/cosmos#380 · Filter by author Jtigas opened on Oct 4, 2026
  5

• Printable area offset?

  OpenCentauri/cosmos#377 · Filter by author computertester10 opened on Oct 4, 2026
  1

• Adaptive bed meshing vs default

  OpenCentauri/cosmos#375 · Filter by author Notjohnsnow opened on Oct 2, 2026

• CANVAS tool load timed out

  OpenCentauri/cosmos#369 · Filter by author maxpajewski opened on Sep 30, 2026
  7

• MCU shutdown "Timer too close" when M106 P3 (case_fan) is sent right after "calculate extruder phase offset"

  OpenCentauri/cosmos#366 · Filter by author DaniHem opened on Sep 28, 2026

• I installed cosmos and now cc1 just doesnt power on.

  OpenCentauri/cosmos#365 · Filter by author bruceprattebp-code opened on Sep 28, 2026
  10

• CC2 macros need to be updated

  OpenCentauri/cosmos#361 · Filter by author jamesturton opened on Sep 27, 2026

• CC2 stepper drivers need to be tuned

  OpenCentauri/cosmos#359 · Filter by author jamesturton opened on Sep 27, 2026
  1

• Spoolman connection race condition during Moonraker startup

  OpenCentauri/cosmos#357 · Filter by author Vampiro1 opened on Sep 27, 2026
  6

• Resume after power failure??

  OpenCentauri/cosmos#348 · Filter by author peepsnet opened on Sep 25, 2026
  6

• RESUME fails with "Extrude below minimum temp" when PRINT_START was not used

  OpenCentauri/cosmos#324 · Filter by author Tanguille opened on Sep 11, 2026

• Orca Upload and Print fails on Cosmos: 'Unable to open file' (works via Mainsail and on OC patched)

  OpenCentauri/cosmos#269 · Filter by author pdscomp opened on Jul 25, 2026
  1

• Support DHCP Option 42 (NTP Servers) for Chrony

  OpenCentauri/cosmos#268 · Filter by author rodripr1 opened on Jul 23, 2026

• [CC1] RTL8821CU rtw88 post-bind USB control transfers fail with -EPROTO

  OpenCentauri/cosmos#264 · Filter by author pdscomp opened on Jul 21, 2026

• [CC1] RTL8821CU fails USB enumeration with -EPROTO after warm reboot

  OpenCentauri/cosmos#263 · Filter by author pdscomp opened on Jul 21, 2026

• occasional 'timer too close' during printing

  OpenCentauri/cosmos#246 · Filter by author vytrixGH opened on Jul 14, 2026
  10

• Separate macros for PID tuning and Input Shaping

  OpenCentauri/cosmos#102 · Filter by author RowanSkie opened on Apr 7, 2026
  1

• Inconsistent tach readings between fans, speeds, and relative to spec speed

  OpenCentauri/cosmos#83 · Filter by author robertsamples opened on Apr 4, 2026

• Printer needs reboot after installing cosmos before being able to see wifi networks

  OpenCentauri/cosmos#69 · Filter by author gta4hater opened on Apr 3, 2026
  20