Local climate automation for your growing space.

MycoBox brings environmental monitoring and equipment control to one web interface. Open it from a phone or computer through local Wi-Fi or the controller's access point. Normal operation needs no cloud account or permanently connected computer.

Explore the website · Get started · Download firmware

Your growbox at a glance

• Monitor your chamber and room: compare Chamber readings with an optional Ambient sensor, with up to 72 hours of measurement history and equipment activity.
• Plan growing routines: create a cycle of up to 32 days with four time points per day, using Timer or Adaptive humidification.
• Take manual control: choose Schedule, On or Off separately for Light, Fan and Humidifier. Heating stays automatic.
• Connect equipment: pair up to six Zigbee devices, including sockets, power strips and one compatible temperature/humidity sensor. Assign outputs across different devices.
• Keep your configuration: export settings and diagnostics or restore selected settings.
• Manage controller groups: copy modes or a growing cycle to other MycoBox units.

The web interface guide explains the panels and controls.

Screenshots show an earlier interface. The guides describe the current controls and device limits.

Measurements and activity

Compare the chamber with the surrounding room and view readings alongside equipment activity. Chamber uses the built-in SHT41 sensor and controls automation; Ambient is for monitoring. History is stored on the controller and starts again after a restart. Explore measurements and charts.

Cycle and automation

Build a daily profile and adjust it as your growing cycle progresses. Schedule edits take effect immediately; choose Save cycle to keep them after a restart. Manual On and Off last until you choose Schedule or restart MycoBox. Explore cycle settings.

Find the next step

Start with Compatibility and Getting started, then follow Zigbee setup to identify connected outputs.

For maintenance, use Backup and restore, Firmware updates or Troubleshooting.

Compatible updates through the panel keep settings, Zigbee pairing and output assignments. Moving from the older one-device firmware to the six-device version requires USB setup of both controllers and pairing again; follow the update guide before choosing a file.

The documentation map also covers hardware, equipment safety, network security and planned extensions. Local warnings support monitoring; equipment still needs appropriate independent protections.